TE 300i Rockstar Edition 2022

  • Choose Colour
  • Base Price: 11,799.00 USD*

*MSRP: $ 11799 plus $ 485 freight

The trusted 2-stroke is exceedingly simple to manage and features a host of developments which enhance its class-leading performance. With electronic fuel injection, smooth power delivery and impressive torque and power, the TE 300i retains the traits it's become renowned for. However, with the class leading chassis and ergonomics, it offers an even more controllable and thrilling ride. The TE 300i Rockstar Edition features the same advanced technology with added colour, graphic and part updates to replicate the Rockstar Energy Husqvarna Factory race machines.
  • PHO_BIKE_90_RE_te300i-rockstar-us-my22-90-re_#SALL_#AEPI_#V1.jpg
    PHO_BIKE_PERS_REHI_te-300i-rockstar-edition-us-my22-rear-re_#SALL_#AEPI_#V1.jpg
    PHO_BIKE_PERS_LIHI_te-300i-rockstar-edition-us-my22-rear-le_#SALL_#AEPI_#V1.jpg
    PHO_BIKE_90_LI_te-300i-rockstar-edition-us-my22-90-le_#SALL_#AEPI_#V1.jpg
    PHO_BIKE_PERS_REVO_te-300i-rockstar-edition-us-my22-45-re_#SALL_#AEPI_#V1.jpg
    PHO_BIKE_PERS_LIVO_te-300i-rockstar-edition-us-my22-45-le_#SALL_#AEPI_#V1.jpg
The trusted 2-stroke is exceedingly simple to manage and features a host of developments which enhance its class-leading performance. With electronic fuel injection, smooth power delivery and impressive torque and power, the TE 300i retains the traits it's become renowned for. However, with the class leading chassis and ergonomics, it offers an even more controllable and thrilling ride. The TE 300i Rockstar Edition features the same advanced technology with added colour, graphic and part updates to replicate the Rockstar Energy Husqvarna Factory race machines.

*MSRP: $ 11799 plus $ 485 freight

Unmatched performance

01. Unmatched performance

Unmatched performance

Engine

The 300 cc 2-stroke engine in the TE 300i is the flagship of the Husqvarna Motorcycles enduro range. Featuring precisely positioned shaft arrangements for optimal mass centralization, a counter balancer shaft reducing vibration, a twin-valve controlled power valve and electronic fuel injection, it is the benchmark when it comes to enduro performance.

Cylinder

The 72 mm bore cylinder in the TE 300i features a twin valve-controlled power valve system which delivers smooth and controlled power throughout the RPM range. Exhaust port timing has been improved with the combination of an optimised, adjustable power valve drive. The cylinder also features two inlet positions at the rear of the cylinder where a pair of fuel injectors are mounted. This ensures efficient combustion resulting in reduced fuel consumption and emissions.

CRANKCASES

Designed for minimal weight, the die-cast crankcases on the TE 300i engine feature a thin-wall design. To centralize mass, the shaft arrangement has been precisely positioned to harness oscillating masses at the ideal centre of gravity. The counter balancer shaft is perfectly integrated, making for a compact design. Additionally, the water pump casing improves cooling by optimising the flow of coolant.

EXHAUST

Tailored specifically for each model using an innovative 3D design process, the header pipe on the TE 300i offers further improvements in geometry and performance. This allows for improved ground clearance, while a corrugated surface makes the header pipe resistant to impact out on the trail. The muffler also features an aluminium mounting bracket and a dense packing material for improved noise damping and weight saving.

Unmatched performance

Engine

The 300 cc 2-stroke engine in the TE 300i is the flagship of the Husqvarna Motorcycles enduro range. Featuring precisely positioned shaft arrangements for optimal mass centralization, a counter balancer shaft reducing vibration, a twin-valve controlled power valve and electronic fuel injection, it is the benchmark when it comes to enduro performance.
Unmatched performance

Cylinder

The 72 mm bore cylinder in the TE 300i features a twin valve-controlled power valve system which delivers smooth and controlled power throughout the RPM range. Exhaust port timing has been improved with the combination of an optimised, adjustable power valve drive. The cylinder also features two inlet positions at the rear of the cylinder where a pair of fuel injectors are mounted. This ensures efficient combustion resulting in reduced fuel consumption and emissions.
Unmatched performance

CRANKCASES

Designed for minimal weight, the die-cast crankcases on the TE 300i engine feature a thin-wall design. To centralize mass, the shaft arrangement has been precisely positioned to harness oscillating masses at the ideal centre of gravity. The counter balancer shaft is perfectly integrated, making for a compact design. Additionally, the water pump casing improves cooling by optimising the flow of coolant.
Unmatched performance

EXHAUST

Tailored specifically for each model using an innovative 3D design process, the header pipe on the TE 300i offers further improvements in geometry and performance. This allows for improved ground clearance, while a corrugated surface makes the header pipe resistant to impact out on the trail. The muffler also features an aluminium mounting bracket and a dense packing material for improved noise damping and weight saving.
State-of-the-art chassis

02. State-of-the-art chassis

State-of-the-art chassis

FRAME

The chromium molybdenum steel frame is expertly crafted using laser-cut, robot-welded, hydro-formed tubes, ensuring the highest level of precision and quality. The specifically crafted geometry provides a distinctive longitudinal and torsional rigidity, for exceptional rider feedback, energy absorption and stability. The cylinder head mountings are made of forged aluminium, improving handling and comfort. The premium black powder coated frame features standard frame protectors, providing extra durability.

INTEGRATED COOLING AND RADIATORS

The radiators are expertly crafted using high-strength aluminium with CFD (computational fluid dynamics) to channel air through the radiators more efficiently. The cooling system is intelligently integrated into the frame, eliminating the need for additional hoses. The large centre tube running through the frame reduces pressure at this point, allowing for a consistent coolant flow. Additionally, the radiators are mounted close to the centre of gravity for improved handling agility. An optional radiator fan can be fitted and is available in the Husqvarna accessories catalogue.

Composite carbon fibre subframe

The carbon composite subframe is unique to Husqvarna Motorcycles and showcases pioneering technology and innovation. Using 70% polyamide and 30% carbon fiber, the new 2-piece subframe saves 250 g for a total weight of just over 2.2 lbs. Light, robust and now 50 mm longer, the new subframe delivers improved rigidity, handling and rider comfort.

OIL TANK AND PUMP

An electronic oil pump feeds vital 2-stroke oil into the engine. It is located just below the oil tank and feeds the oil via the throttle body, meaning the oil is only mixed with air at this stage. The pump is controlled by the EMS and delivers the optimal amount of oil according to the current RPM and engine load. The oil tank is connected to a filler hose which runs through the upper tube of the frame to a filler cap conveniently located for easy refills. The tank capacity is 0.7 l and is connected to a low-level sensor which illuminates when the tank needs refilling.

State-of-the-art chassis

FRAME

The chromium molybdenum steel frame is expertly crafted using laser-cut, robot-welded, hydro-formed tubes, ensuring the highest level of precision and quality. The specifically crafted geometry provides a distinctive longitudinal and torsional rigidity, for exceptional rider feedback, energy absorption and stability. The cylinder head mountings are made of forged aluminium, improving handling and comfort. The premium black powder coated frame features standard frame protectors, providing extra durability.
State-of-the-art chassis

INTEGRATED COOLING AND RADIATORS

The radiators are expertly crafted using high-strength aluminium with CFD (computational fluid dynamics) to channel air through the radiators more efficiently. The cooling system is intelligently integrated into the frame, eliminating the need for additional hoses. The large centre tube running through the frame reduces pressure at this point, allowing for a consistent coolant flow. Additionally, the radiators are mounted close to the centre of gravity for improved handling agility. An optional radiator fan can be fitted and is available in the Husqvarna accessories catalogue.
State-of-the-art chassis

Composite carbon fibre subframe

The carbon composite subframe is unique to Husqvarna Motorcycles and showcases pioneering technology and innovation. Using 70% polyamide and 30% carbon fiber, the new 2-piece subframe saves 250 g for a total weight of just over 2.2 lbs. Light, robust and now 50 mm longer, the new subframe delivers improved rigidity, handling and rider comfort.
State-of-the-art chassis

OIL TANK AND PUMP

An electronic oil pump feeds vital 2-stroke oil into the engine. It is located just below the oil tank and feeds the oil via the throttle body, meaning the oil is only mixed with air at this stage. The pump is controlled by the EMS and delivers the optimal amount of oil according to the current RPM and engine load. The oil tank is connected to a filler hose which runs through the upper tube of the frame to a filler cap conveniently located for easy refills. The tank capacity is 0.7 l and is connected to a low-level sensor which illuminates when the tank needs refilling.
Race-winning setup

03. Race-winning setup

Race-winning setup

WP XPLOR FORK

The WP XPLOR 48 front fork is designed specifically for enduro riding. Its open cartridge layout has a spring in each leg with split damping functions. Compression damping in the left leg and rebound damping in the right. Adjustment is via easy-to-access clickers (30 clicks) on the top of each fork leg. The standard preload adjusters allow for easier adjustment without the use of tools. The fork's mid-valve piston delivers consistent damping, while the setting allows the fork to operate higher in the stroke for exceptional rider feedback and bottoming resistance.

WP XACT REAR SHOCK

The WP XACT shock provides advanced damping characteristics to the range. The compact and lightweight shock features a pressure balance inside, ensuring consistent damping and superior rider comfort. Using the same linkage progression found in the Husqvarna Motocross range, the rear end sits low for improved control in extreme enduro conditions. The fully adjustable component delivers 300 mm rear wheel travel, as well as unrivalled traction, feeling and energy absorption.

BREMBO BRAKES

The new Brembo braking system offers the highest level of braking performance while being specifically tailored for Enduro riding to deliver a sensitive and modulated feel as approved by our Factory Racing team. The new, floating mounted 260mm front wave brake disc and 220mm solid rear brake disc by GALFER keep weight to a minimum while delivering exceptional performance and offer complete braking confidence.

BODYWORK

Featuring replica motorsport graphics on the Rockstar Edition, the TE 300i features a bodywork which clearly showcases Husqvarna Motorcycles' progressive approach to offroad motorcycle design. The ergonomics are specifically tailored to deliver great comfort and control. As a result of extensive testing, the slim contact points make shifting between riding positions easier and allow the rider to flow with movement. The flat seat profile, together with the black seat cover with additional ribs, deliver superior comfort and control in all conditions.

Race-winning setup

WP XPLOR FORK

The WP XPLOR 48 front fork is designed specifically for enduro riding. Its open cartridge layout has a spring in each leg with split damping functions. Compression damping in the left leg and rebound damping in the right. Adjustment is via easy-to-access clickers (30 clicks) on the top of each fork leg. The standard preload adjusters allow for easier adjustment without the use of tools. The fork's mid-valve piston delivers consistent damping, while the setting allows the fork to operate higher in the stroke for exceptional rider feedback and bottoming resistance.
Race-winning setup

WP XACT REAR SHOCK

The WP XACT shock provides advanced damping characteristics to the range. The compact and lightweight shock features a pressure balance inside, ensuring consistent damping and superior rider comfort. Using the same linkage progression found in the Husqvarna Motocross range, the rear end sits low for improved control in extreme enduro conditions. The fully adjustable component delivers 300 mm rear wheel travel, as well as unrivalled traction, feeling and energy absorption.
Race-winning setup

BREMBO BRAKES

The new Brembo braking system offers the highest level of braking performance while being specifically tailored for Enduro riding to deliver a sensitive and modulated feel as approved by our Factory Racing team. The new, floating mounted 260mm front wave brake disc and 220mm solid rear brake disc by GALFER keep weight to a minimum while delivering exceptional performance and offer complete braking confidence.
Race-winning setup

BODYWORK

Featuring replica motorsport graphics on the Rockstar Edition, the TE 300i features a bodywork which clearly showcases Husqvarna Motorcycles' progressive approach to offroad motorcycle design. The ergonomics are specifically tailored to deliver great comfort and control. As a result of extensive testing, the slim contact points make shifting between riding positions easier and allow the rider to flow with movement. The flat seat profile, together with the black seat cover with additional ribs, deliver superior comfort and control in all conditions.
Premium technology

04. Premium technology

Premium technology

MAP SWITCH

By using the MAP SELECT SWITCH, the engine characteristics can be tailored to modify the power delivery according to rider preference, conditions and terrain. It has two settings which can be toggled on the fly, namely, Map 1, for standard and full power, and Map 2, for softer power and delayed ignition timing for terrain with less traction.

THROTTLE BODY

The TE 300i uses a 39 mm throttle body which regulates the amount of air entering the engine via a butterfly operated by dual throttle cables connected to the handlebar throttle assembly. 2-stroke oil is mixed with the air and enters the engine to lubricate the crankshaft, cylinder & piston. Additionally, a throttle position sensor (TPS) relays airflow data to the ECU which in turn calculates the amount of oil and fuel delivered to the engine while a bypass screw regulates the idling speed and a cold start device opens a bypass providing more air for cold starts.

ELECTRIC START AND WIRING HARNESS

All TE models come standard with an electric starter. The system uses a compact and lightweight Li-Ion battery which is 1 kg lighter than a conventional battery. With several years of experience of developing and perfecting electric starting, the proven reliability on the Husqvarna enduro range is second to none, ensuring a quick and seamless start in any condition. Additionally, the wiring harness concentrates all needed electrical components into a common area below the seat for easy accessibility.

ENGINE MANAGEMENT SYSTEM

The TE 300i features an electronic control unit (ECU) which is responsible for a number of functions. The unit determines the ignition timing, the amount of fuel & oil injected into the cylinder and additionally, translates the information received from various sensors to adapt values and make corrections for automatic temperature and altitude compensation. This means the engine always runs at the optimum fuel/air mixture at any altitude.

Premium technology

MAP SWITCH

By using the MAP SELECT SWITCH, the engine characteristics can be tailored to modify the power delivery according to rider preference, conditions and terrain. It has two settings which can be toggled on the fly, namely, Map 1, for standard and full power, and Map 2, for softer power and delayed ignition timing for terrain with less traction.
Premium technology

THROTTLE BODY

The TE 300i uses a 39 mm throttle body which regulates the amount of air entering the engine via a butterfly operated by dual throttle cables connected to the handlebar throttle assembly. 2-stroke oil is mixed with the air and enters the engine to lubricate the crankshaft, cylinder & piston. Additionally, a throttle position sensor (TPS) relays airflow data to the ECU which in turn calculates the amount of oil and fuel delivered to the engine while a bypass screw regulates the idling speed and a cold start device opens a bypass providing more air for cold starts.
Premium technology

ELECTRIC START AND WIRING HARNESS

All TE models come standard with an electric starter. The system uses a compact and lightweight Li-Ion battery which is 1 kg lighter than a conventional battery. With several years of experience of developing and perfecting electric starting, the proven reliability on the Husqvarna enduro range is second to none, ensuring a quick and seamless start in any condition. Additionally, the wiring harness concentrates all needed electrical components into a common area below the seat for easy accessibility.
Premium technology

ENGINE MANAGEMENT SYSTEM

The TE 300i features an electronic control unit (ECU) which is responsible for a number of functions. The unit determines the ignition timing, the amount of fuel & oil injected into the cylinder and additionally, translates the information received from various sensors to adapt values and make corrections for automatic temperature and altitude compensation. This means the engine always runs at the optimum fuel/air mixture at any altitude.

Technical Details

Engine

  • Transmission 6-speed
  • Starter Electric starter
  • Stroke 72 mm
  • Bore 72 mm
  • Clutch Wet, DDS multi-disc clutch, Brembo hydraulics
  • Displacement 293.2 cm³
  • EMS Continental EMS
  • Design 1-cylinder, 2-stroke engine

Chassis

  • Weight (without fuel) 105.4 kg
  • Tank capacity (approx.) 8.5 l
  • Front brake disc diameter 260 mm
  • Rear brake disc diameter 220 mm
  • Front brake Disc brake
  • Rear brake Disc brake
  • Chain X-Ring 5/8 x 1/4"
  • Frame design 25CrMo4 steel central-tube frame
  • Front suspension WP XPLOR-USD, Ø 48 mm
  • Ground clearance 360 mm
  • Rear suspension WP XACT Monoshock with linkage
  • Steering head angle 63.5 °
  • Suspension travel (front) 300 mm
  • Suspension travel (rear) 300 mm