TE 250

01. Potencia sin rival

Motor

Delivering the best combination of power and weight, the TE 250 engine is a firm favorite with enduro riders. With the introduction of Throttle Body Injection (TBI) for 2024, the engine delivers improved torque while maintaining its high-revving two-stroke character. Designed to be more compact to reduce overall weight, a total saving of over 2.6 lb (1.2 kg) when compared to the previous generation underlines the ongoing development of this popular machine. Additionally, the shaft arrangements inside the TE 250 engine are precisely positioned for greater mass centralization while a counter balancer shaft reduces vibration.

Cilindro

With the introduction of Throttle Body Injection (TBI) on the TE 250, the 66.4 mm bore cylinder now features an innovative electronic exhaust control system that manages the opening of the lateral exhaust ports after the main exhaust port opens for maximum power delivery. Together with a machined finish on the upper contour of the exhaust port ensuring accurate port timing, unrivalled engine performance is assured.

Cuerpo de aceleración

La TE 250 utiliza un cuerpo de aceleración de 39 mm de nuevo desarrollo con inyectores dobles colocados para optimizar el flujo y conseguir una respuesta del acelerador más inmediata y una mayor facilidad de conducción. El ralentí se controla mediante la válvula de mariposa, con un inyector de baja carga y otro de alimentación superior que garantizan el máximo rendimiento. Además, un nuevo sensor de posición de la válvula de mariposa (TPS) ofrece un mejor arranque en frío con la válvula del acelerador pivotando ahora sobre cojinetes de bolas para una acción más suave del acelerador.

Depósito de aceite

An electronic oil pump feeds vital 2-stroke oil into the engine. It is located just below the oil tank and feeds the oil via the reed cage, meaning the oil is only mixed with air at this stage. The pump is controlled by the EMS and delivers the optimal amount of oil according to the current RPM and engine load. The oil tank is connected to a filler hose which runs through the upper tube of the frame to a filler cap conveniently located for easy refills.

Cárter

Designed to be low in weight without sacrificing strength or reliability, the new crankcases are made using a high-pressure die-cast production process to create a thin-wall design. To centralise engine mass, the shaft arrangements are precisely positioned to harness rotating masses at the ideal centre of gravity.

Escape

Adaptado específicamente a la TE 250 mediante un innovador proceso de diseño en 3D, el colector garantiza un rendimiento sin restricciones y ofrece una mayor distancia al suelo para reducir el riesgo de sufrir daños por impactos. El silenciador también cuenta con un soporte en aluminio y una avanzada estructura interna, logrando una excelente reducción del ruido y del peso.

Motor

Cilindro

Cuerpo de aceleración

Depósito de aceite

Cárter

Escape

02. Parte ciclo vanguardista

Chasis

The proven chromium molybdenum steel frame is refined for 2024. A new shock mounting, which is no longer connected to the main tube, significantly improves the anti-squat behavior of the chassis. With optimized wall thickness in high-stress areas improving reliability, the frame continues to offer advanced geometries and flex characteristics aimed at providing unparalleled rider feedback, energy absorption, and straight-line stability. The frame is complete with a premium metallic blue powder coating with redesigned standard frame protectors offering improved grip in all conditions. Additionally, the redesigned and robust skid plate offers exceptional frame and engine protection.

Subchasis híbrido

Made from 60% polyamide and 40% aluminum, the new subframe offers exceptional strength and durability at a low overall weight of just 3.9 lb (1.8 kg). The lower subframe spars and frame mounts are manufactured from cast aluminum for significantly improved reliability, with the upper section made from injection-molded polyamide to enable specific flex characteristics.

Basculante

El nuevo basculante hueco está fabricado a partir de una sola pieza de aluminio mediante un proceso mejorado de fundición a presión para conseguir una rigidez óptima y una reducción de peso de 190 g. Para optimizar e igualar las características de flexión del nuevo chasis, se monta un nuevo eje trasero de 22 mm. Además, el cubrecadenas y el patín de cadena han sido completamente rediseñados para mejorar su durabilidad, con un perfil redondeado del cubrecadenas para evitar golpear con objetos externos.

Carrocería

Adorned with clean, Swedish-inspired graphics, the bodywork is refined with the ergonomics allowing riders to perform at their best for extended periods of time. Adapted after countless hours of testing, the contact points and surfaces in the rider triangle have been repositioned for 2024 to further improve comfort on the motorcycle. A flatter seat profile offers unrestricted movement with a new, high grip cover ensuring riders stay firmly in place under hard acceleration. Above the side panels, recessed pockets allow for the machine to be lifted and moved, which are particularly beneficial for those competing in extreme enduro events.

Depósito de gasolina

A new and transparent 2.24 gallon (8.5 liter) fuel tank fits neatly within the ergonomic bodywork. The fuel pump is new and features and integrated filter for improved supply, with the fuel line positioned to be less exposed and susceptible to any potential damage.

Radiadores

Fabricados con aluminio de alta resistencia, los radiadores se han diseñado utilizando la Dinámica de Fluidos Computacional (CFD) para canalizar el aire de la forma más eficaz. Un gran conducto central canaliza el refrigerante a través del chasis para reducir la presión en este punto del sistema y conseguir un flujo más constante. Un termostato interno mejora aún más la fiabilidad. El tapón del radiador de nuevo diseño con cierre de bayoneta garantiza un ajuste seguro.

Chasis

Subchasis híbrido

Basculante

Carrocería

Depósito de gasolina

Radiadores

03. Ventaja innovadora

Horquilla delantera WP XACT

Each of Husqvarna Motorcycles' enduro machines is now equipped with WP XACT Closed Cartridge spring forks. Designed and developed for the rigours of enduro riding, the fork offers consistent performance thanks to the closed cartridge spring design which optimises oil flow and prevents it from foaming. The addition of a new hydrostop, effective in the last 68 mm of travel, is highly effective on heavy landings to maintain maximum forward momentum. Additionally, riders can alter the compression and rebound settings quickly and easily using the tool-free adjusters found at the top and bottom of each fork leg.

Amortiguador trasero WP XACT

El nuevo amortiguador WP XACT es 100 g más ligero y 15 mm más corto que su predecesor, aunque el recorrido permanece inalterado en 300 mm. Con la extensión y la compresión de alta y baja velocidad ajustables a mano, los cambios de ajuste pueden realizarse rápida y fácilmente sin herramientas. Con un pistón del amortiguador optimizado mediante dinámica de fluidos computacional (CFD), retenes SKF de baja fricción y un sistema de bieletas revisado, la amortiguación, el confort y la tracción están garantizados.

Frenos hidráulicos

The highest level of performance is guaranteed with the latest BRAKTEC braking systems which are specifically designed for enduro riding. New callipers, new brake pads, new levers, and new brake lines together with the GSK wave discs (260 mm disc front and 220 mm rear) result in a sensitive and progressive feel ensuring enhanced control in all conditions.

Embrague hidráulico

El nuevo sistema de embrague BRAKTEC de alta calidad garantiza un desgaste uniforme, fiabilidad y prácticamente, ausencia de mantenimiento. Además, el diseño de la maneta se ha actualizado, proporcionando un cómodo tacto en todas las condiciones. La tolerancia se compensa de manera constante para que el punto de resistencia y el funcionamiento del embrague no se vean afectados por la temperatura ni por el paso del tiempo.

Wheels and tires

Black high-strength alloy rims by D.I.D are coupled to CNC machined hubs using lightweight spokes and silver anodized aluminum nipples. Fitted to the wheels are Dunlop tires which offer superior grip on a wide variety of terrain.

Pletinas de dirección

The 22 mm offset black-anodized CNC machined triple clamps offer premium quality and style standard on all Husqvarna enduro models. The triple clamps have been expertly crafted using superior techniques and materials to provide high levels of quality and reliability. A 2-way handlebar adjustment is standard and allows for customisable ergonomics.

Horquilla delantera WP XACT

Amortiguador trasero WP XACT

Frenos hidráulicos

Embrague hidráulico

Wheels and tires

Pletinas de dirección

04. Tecnología avanzada

Faro LED

El nuevo faro LED proporciona una potencia lumínica aproximadamente un 300% más brillante, lo que mejora mucho la visibilidad nocturna y resulta especialmente eficaz cuando se pilota a través de bosques densos. Gracias a un nuevo diseño de fijación, la unidad de iluminación LED se instala en la máscara del faro mediante un sistema de cierre rápido, que permite sustituirla rápida y fácilmente si resulta dañada.

Interruptor de cambio de mapa

By using the Map Select Switch, the engine characteristics can be tailored to modify the power delivery according to rider preference and conditions. It has two settings that can be engaged while riding - Map 1 (white) is the standard map for linear, progressive power designed for hard pack terrain while Map 2 (green) is more aggressive and suited to sand and heavier conditions.

Estriberas

Utilizando la dinámica de fluidos computacional más avanzada, las nuevas estriberas son ligeramente más anchas para mejorar el control. Además, la posición de fijación de las estriberas en el nuevo chasis las lleva hacia dentro, lo que las hace menos susceptibles de engancharse en el suelo en roderas profundas.

Arranque eléctrico

All TE models come standard with an electric starter. The system uses a compact and lightweight Li-Ion battery, which is 2.2 lb (1 kg) lighter than a conventional battery. With several years of experience in developing and perfecting electric starting, the proven reliability of the Husqvarna enduro range is second to none and ensures quick and easy starting at all times. Additionally, the wiring harness and electrical components are safely located below the seat for easy accessibility.

Sistema de gestión del motor

The Vitesco Engine Management System (EMS) is designed to be small, light, and fast at processing data. It incorporates a Rollover Sensor (ROS) that cuts the ignition and shuts off the engine in the event of a severe crash for an additional layer of security.