TE 150

01. Puissance inégalée

Moteur

The TE 150 has inherited the same fuel-injected technology from the bigger TE 250 and 300. This adds the convenience of a 4-stroke engine by eliminating the need to premix fuel or adjust jetting for altitude. The engine also uses specific shaft arrangements, which are designed to harness the rotating mass of the engine for nimble handling. This, among other developments, makes it a lightweight and compact engine providing usable enduro-specific power while maintaining the low-cost maintenance of a 2-stroke.

Cylindre

The TE 150 features a cylinder with a 58 mm bore and an innovative power valve design. This allows the lively 150 cc engine to deliver controllable power throughout the RPM range. The piston is designed to perfectly match the contour of the combustion chamber, delivering the highest level of 2-stroke performance. Additionally, the cylinder features injectors mounted at the inlet positions, which deliver the fuel downwards into the transfer port, guaranteeing excellent fuel atomization. This ensures more efficient fuel combustion, reduced fuel consumption and improved emissions.

Corps d’injection

La TE 150 utilise un boîtier papillon de 39 mm avec deux injecteurs positionnés pour optimiser le débit, assurant ainsi une réponse plus immédiate de la poignée et une maniabilité exceptionnelle. Le régime de ralenti est contrôlé par la poignée de gaz, avec un injecteur de charge en bas et un injecteur d’alimentation en haut, qui garantissent des performances maximales. De plus, un capteur de position du clapet d’étranglement offre un démarrage à froid fiable avec la poignée de gaz qui pivote sur des roulements à billes pour une accélération plus fluide.

Réservoir d’huile

An electronic oil pump feeds vital 2-stroke oil into the engine. It is located just below the oil tank and feeds the oil via the reed cage, meaning the oil is only mixed with air at this stage. The pump is controlled by the EMS and delivers the optimal amount of oil according to the current RPM and engine load. The oil tank is connected to a filler hose which runs through the upper tube of the frame to a filler cap conveniently located for easy refills.

Carter

Designed for minimal weight, the crankcases on the TE 150 engine feature a thin-wall design. To centralize mass, the shaft arrangements are precisely positioned to harness rotating masses at the ideal center of gravity, while improved sealing is taken care of by the reed block which features optimized carbon fiber reed petals.

Échappement

Conçu spécifiquement pour la TE 150 à l’aide d’un procédé de conception 3D innovant, le collecteur d’échappement garantit des performances illimitées et offre une garde au sol améliorée pour limiter le risque de dommages liés aux impacts sur la piste. Le silencieux se caractérise aussi par un support en aluminium et une structure intérieure sophistiquée qui a pour effet de limiter le poids et de mieux atténuer le bruit.

Moteur

Cylindre

Corps d’injection

Réservoir d’huile

Carter

Échappement

02. Châssis d'avant-garde

Cadre

A proven chromium molybdenum steel frame ensures straight-line stability at speed without sacrificing agility through the slow and technical sections. Optimized wall thickness throughout the chassis aids durability, in addition to providing unparalleled rider feedback and energy absorption. For an optimized level of anti-squat behavior and overall chassis balance, the shock is not directly connected to the main tube. The frame is complete with a premium metallic blue powder coating with frame protectors offering improved grip in all conditions.

Boucle arrière hybride

Made from 60% polyamide and 40% aluminum, the subframe offers exceptional strength and durability at a low overall weight of just 3.9 lb (1.8 kg). The lower subframe spars and frame mounts are manufactured from cast aluminum for reliability with the upper section made from injection-molded polyamide to enable specific flex characteristics.

Bras oscillant

Le bras oscillant est fabriqué selon un procédé de moulage sous pression pour une rigidité optimale. Pour répondre aux caractéristiques de flexion du châssis, un axe de roue arrière de 22 mm est utilisé. D’autre part, le bras oscillant permet d’améliorer la durabilité du patin de chaîne tandis que le guide-chaîne se démarque par son profil arrondi qui évite qu’il ne s’accroche dans des objets extérieurs.

Habillage

Adorned with clean, Swedish-inspired graphics, the bodywork is refined with the ergonomics allowing riders to perform at their best for extended periods of time. Adapted after countless hours of testing, the contact points and surfaces in the rider triangle have been repositioned for 2024 to further improve comfort on the motorcycle. A flatter seat profile offers unrestricted movement with a new, high grip cover ensuring riders stay firmly in place under hard acceleration. Above the side panels, recessed pockets allow for the machine to be lifted and moved, which are particularly beneficial for those competing in extreme enduro events.

Réservoir de carburant

A 2.24 gallon (8.5 liter) fuel tank integrates neatly with the ergonomic bodywork and features a robust rubber cushion beneath it to hold the tank in place and protect the frame from wear. The one-piece fuel pump design and integrated filter allows the tank to be emptied further, which is particularly beneficial during longer events. For durability, the external fuel line is specifically routed to make it less exposed and susceptible to damage.

Radiateurs

Fabriqués en aluminium haute résistance, les radiateurs sont conçus à l’aide de la mécanique des fluides numérique pour y diriger l’air avec une efficacité optimale. Le large axe central dirige le liquide de refroidissement à travers le cadre pour réduire la pression à cet endroit du système afin de générer un débit plus homogène. Un thermostat interne améliore la fiabilité tandis que le bouchon de radiateur est à fermeture à baïonnette pour une pose sécurisée.

Cadre

Boucle arrière hybride

Bras oscillant

Habillage

Réservoir de carburant

Radiateurs

03. Approche novatrice

Fourche avant WP XACT

Each of Husqvarna Motorcycles' enduro machines is now equipped with WP XACT Closed Cartridge spring forks. Designed and developed for the rigours of enduro riding, the fork offers consistent performance thanks to the closed cartridge spring design which optimises oil flow and prevents it from foaming. The addition of a new hydrostop, effective in the last 68 mm of travel, is highly effective on heavy landings to maintain maximum forward momentum. Additionally, riders can alter the compression and rebound settings quickly and easily using the tool-free adjusters found at the top and bottom of each fork leg.

Amortisseur arrière WP XACT

L’amortisseur arrière WP XACT très léger offre un débattement de 300 mm. La détente et la compression à haute et basse vitesse étant réglables à la main, les changements se font rapidement et facilement sans outils. Le piston d’amortisseur optimisé à l’aide de la mécanique des fluides numérique, les joints à faible coefficient de frottement et un nouveau système à biellettes, plus petit pour en limiter le poids, garantissent un amortissement, un confort et une adhérence homogènes.

Freins hydrauliques

The highest level of performance is guaranteed thanks to the class leading Brembo calipers and controls, which are new for 2025. Together with GSK wave discs (260 mm disc front and 220 mm rear), which are designed to prevent mud from building up, superior stopping power and braking confidence is assured in all conditions.

Embrayage hydraulique

The new, high-performance Brembo hydraulic clutch system delivers even wear, near maintenance-free operation, and perfect feel in every condition. With this hydraulic system, free play is constantly compensated so that the pressure point, and the function of the clutch, remain identical in cold or hot conditions, as well as over time. Countless hours of testing have proven the reliability of the high-quality, Italian-made Brembo hydraulic system.

Wheels and tires

Black high-strength alloy rims by D.I.D are laced to CNC machined hubs using lightweight spokes and silver anodized aluminum nipples. Fitted to the wheels are Dunlop Enduro tires, which are used by Husqvarna Factory Racing, as they offer superior grip on a wide variety of terrain.

T de fourche

The black-anodized, CNC-machined triple clamps offer premium quality as standard. They have a carefully calculated 22 mm offset and are expertly crafted using superior techniques and materials for the highest levels of quality and reliability. The handlebar clamp has a large contact surface with the ProTaper bars to help prevent twisting in the event of an impact and offers two mounting options for customizable ergonomics.

Fourche avant WP XACT

Amortisseur arrière WP XACT

Freins hydrauliques

Embrayage hydraulique

Wheels and tires

T de fourche

04. Technologie de pointe

Phare LED

Le phare LED assure une luminosité remarquablement claire pour une excellente visibilité la nuit, qui s’avère particulièrement efficace dans les bois denses. Un concept de montage intelligent intègre l’unité LED dans la plaque-phare à l’aide d’un système à fixation rapide, ce qui permet de la remplacer rapidement et facilement en cas de dommage.

Sélecteur de cartographie

By using the Map Select Switch, the engine characteristics can be tailored to modify the power delivery according to rider preference and conditions. It has two settings that can be engaged while riding - Map 1 (white) is the standard map for linear, progressive power designed for hard pack terrain while Map 2 (green) is more aggressive and suited to sand and heavier conditions.

Repose-pieds

Avec l’aide de la mécanique des fluides numérique de pointe, les grands repose-pieds ont été conçus pour offrir un maximum de contrôle ou pour empêcher la boue de s’accumuler. De plus, la position de montage les amène vers l’intérieur, ce qui les rend moins susceptibles de s’accrocher au sol dans les ornières profondes.

Démarreur électrique

All TE models come standard with an electric starter. The system uses a compact and lightweight Li-Ion battery, which is 2.2 lb (1 kg) lighter than a conventional battery. With several years of experience in developing and perfecting electric starting, the proven reliability of the Husqvarna enduro range is second to none and ensures quick and easy starting at all times. Additionally, the wiring harness and electrical components are safely located below the seat for easy accessibility.

Système de gestion moteur

The Vitesco Engine Management System (EMS) is designed to be small, light, and fast at processing data. It incorporates a Rollover Sensor (ROS) that cuts the ignition and shuts off the engine in the event of a severe crash for an additional layer of security.